Routers World

I recently helped a person who had a new DIR-655 and was not really an IT person, so I only had a working knowledge of networks.

I was having problems getting your 655 to connect via PPPoE and it turns out he had made an assumption about how the routers that was not true, but it was a pretty easy assumption to make if not exactly understand how routers work with PPPoE.

What really bothers me about this situation was that DLink demanded money to support it. There is something fundamentally wrong with how customers DLink support here. Selling a highly technical device for the average home user, usually non-technical. Therefore, it is fully expected that some users struggle that they were created.

DLink unreasonably expect the lame manual will be enough for any normal person to follow and if not, they will demand money from them to explain what is configured correctly. They are making money with customers who buy its products again and again to explain to customers how to use their products.

I think it just stinks of greed. Some users just do not understand, naturally, and must be trained. Its products are designed for home, they will get IT DO NOT BUY PRODUCTS FROM YOUR TOWN and it should offer support for free.

Basically, if you’re an average home user, DO NOT BUY DLINK as routers need a certain level of IT skills to set and if you do not, DLink demand money from you to help with their routers.

Better off looking for a company that is willing to support IT illiterate consumers free of charge. If you know of one, post a comment.

D-Link Xtreme N DIR-855 is a router / access point is compatible with the final 802.11n standard for wireless networks. The D-Link device is one of the most advanced and sophisticated access points available in the market is able to operate simultaneously on the frequencies of 2.4 GHz (typical of standard 802.11 b / g) and 5 GHz provided by the new 802.11 n standard . The result is a higher bandwidth, less interference and also the ability to customize the routing of data packets. In essence, it is possible to separate the wireless network depending on the applications used: for example, you can route packets of the VoIP traffic video / audio over 5GHz and leave the 2.4GHz band for Internet browsing, instant messaging programs and e-mail.

D-Link Xtreme N DIR-855 has three high-gain antennas are compatible with MIMO technology provided by the 802.11 n standard, which can be oriented to suit your needs: it even allows you to install the unit on the wall. Outwardly D-Link Xtreme N DIR-855 features a sleek, houses on top of an OLED display that graphically summarizes the operating parameters and provides access to many of the functions of the device. On the back of D-Link Xtreme N DIR-855 connectors are four RJ-45 LAN, a WAN port for connecting to an ADSL modem or router and a USB port. The performance of D-Link Xtreme N DIR-855 are very good: the device is able to achieve a total bandwidth of 600 Mbps derived from the sum 300 + 300 Mbps of bandwidth on each of the theoretical frequencies.

D-Link has introduced green technologies to its range of home Wi-Fi routers.

With D-Link Green Ethernet Technology and Wi-Fi scheduling, the new routers can save up to 41% of the power consumption of a standard wireless router.

The Xtreme N line of routers is being shipped with D-Link Green Ethernet technology, which saves energy by automatically detecting link status and network cable length, and adjusting power accordingly, along with Wi-Fi scheduling that the customer to program when the Wi-Fi signal is turned on to further reduce power consumption.

Harrison Albert, regional sales director, D-Link Middle East said: “D-Link is working to take the lead in integrating innovative, power-saving technology into our home and business networking solutions that doesn’t sacrifice performance or functionality. By offering green upgrades to some of our most popular Wi-Fi routers, we’re helping protect the environment while our customers save money in the process.”

The new technology is part of a green computing initiative by D-Link, which also includes compliance with standards on for energy consumption and use of materials, and consumer education and recycling program.

The networking company said on Monday that the problem was discovered by security researchers SourceSec, affecting three of its wireless routers: DIR-855 (hardware version A2), the DIR-655 (version A1 to A4) and DIR- 635 (version B). The devices are marketed to consumers and businesses.

The fault lies in the implementation of D-Link of the House of Cisco Network Management Protocol (FZ), which lets you configure the remote router. In a blog post on January 9, researchers said they had SourceSec “found a way to view and edit the configuration of D-Link router without administrative credentials, using a management interface seconds. They also said they have written a proof of concept tool called HNAP0wn to exploit the vulnerability.

While it is undisputed that the flaw exists, and D-Link SourceSec disagree that the routers are affected.

In a document accompanying the blog entry said SourceSec D-Link routers affected are: DI-524 (C1 hardware version, firmware version 3. 23), DIR-628 (B2 version, Version 1.22NA 1.20NA firmware) and DIR-655 (A1 version, firmware version 1.30EA).

However, D-Link, said that the routers are either not disclosed or are not offered as described by the researchers.

“Of the three models allegedly affected, one was never sold in Europe and is not compatible with FZ” he said. “One does not exist [and] there is a firmware version not available anywhere for download.”

D-Link model he says is not in the European market is DI-524 (C1). Moreover, this model is not compatible with FZ, the company said. The model does not exist is DIR-628 (B2), since only one team has been released for that device. Finally, the model DIR-655 (A1, 1. 30EA firmware) running firmware version restricted in East Asia and therefore irrelevant to Europe.

SourceSec said in his blog post that it is suspected that “most if not all, of D-Link routers since 2006 are” vulnerable.

However, in the course of an investigation in which D-Link routers test their SourceSec using the tool, the company found that only three of their routers were affected by the vulnerability. Furthermore, only run the exploit code was not enough to threaten the D-Link routers, he said.

“It is important to note that the implementation of the code alone is not enough to cut into the router: only software tool that seems to achieve this result,” the statement said D-Link.

The company is in process of updating its firmware through Europe, a spokesman for D-Link, told ZDNet UK on Monday.

“[] D-Link is the load of patches for its European sites,” said the spokesman, who added that the firmware updates had been circulated over the weekend.

D-Link SourceSec criticized, saying it had not been informed of the investigation prior to publication, and that the report could have affected their clients.

“In releasing the tool, and give specific instructions, the report’s authors have publicly highlighted how security can be breached, which could have serious consequences for our customers,” said the statement D-Link.

The D-Link DIR-825 is a compact and neat-looking white plastic box with black trim around the middle. The front sports the standard LED lights showing status and which ports are being accessed.

On the rear of the unit you’ll find two antennae which need to be manually screwed in, so giving you the option of adding high-gain antennae if required. The back of the box has all the usual features, so you will find four Gigabit Ethernet ports for a fixed connection, as well as a broadband internet connection.

Interestingly, D-Link has built ‘Green Technology’ into this router, so any ports that are not in use automatically switch off, along with their respective LED indicator.

There is also a USB port for adding a printer or external storage. The latter needs to be set up using the supplied D-Link SharePort utility software. Set-up is a three-step process that requires you to install the software on your laptop before adding the hardware.

Installation is wizard-based and sets up the DIR-825 via a web browser. While the settings are comprehensive, they’re not that straightforward. Once you’ve set up the software, you can add the hardware and then set up the security aspects of your router.

On the right-hand side of the router is a small Wi-Fi Protected Set-up (WPS) button, which offers one-click encryption between other WPS devices.

When it came to performance, we found the signal strength of the DIR-825 to be excellent. Faster throughputs work best on the 5GHz frequency and, once you’re accustomed to the software, you can reserve bandwidth for specific tasks.

The D-Link DIR-825 is compact and offers solid performance. It may not be the easiest to set up, but once running it works exceedingly well.

D-Link has introduced green technologies to its range of home Wi-Fi routers.

With D-Link Green Ethernet Technology and Wi-Fi scheduling, the new routers can save up to 41% of the power consumption of a standard wireless router.

The Xtreme N line of routers is being shipped with D-Link Green Ethernet technology, which saves energy by automatically detecting link status and network cable length, and adjusting power accordingly, along with Wi-Fi scheduling that the customer to program when the Wi-Fi signal is turned on to further reduce power consumption.